Some people prefer full face while others prefer open face helmets. The full head ones are necessary only in case your motorcycle is big or when you drive at a high speed. But that doesn’t mean that full face helmets are safer than open face ones. They are not only safer, but they are also cooler and can be taken on and off easily by the rider. There are important features that you need to look for when you buy an open face type of helmet.
This helmet also be well tested and highly certified, though you will never know if a helmet has passed the standards, which is known as the USDOT which is responsible for the minimum levels of presentment a helmet must meet. In every helmet you look for must have a DOT sticker in it. The materials and the safety of the helmet is also essential more than the design. The materials should be the best in the market to boost the comfort and the performance as well.
Here is the helmet that i’m really interested in:
Bell Rogue Helmet
Some people say that they look like Darth Vader with it on. Bell Rogue Helmet has intrigued me at the first look. The polyurethane-molded muzzle, according to the manufacturer, is there to protect the rider’s face from elements, which it does, but honestly, its primary function is to make this helmet look cool. The muzzle has air vents, and fleece lining on the inside which can be easily adjusted to any rider’s face. However, this bell’s muzzle may not fit at all, but the fitting works perfectly on your head. The inner liner can be removed and washed, it’s held in place by four snaps. You can remove the ear pads the same way, and there are also pockets for your speakers, which is great if you tend rely on communicate systems. Its price is about $250 with 5 years warranty. The Bell Rogue Helmet is a good choice for both quality and looks.
If you ride frequently then some odors can develop on the inside of your helmet Some people will say they don’t mind it, but if you want to keep your helmet clean and odor free you should wash it from time to time. This can help to bring back it’s original look and give an opportunity to check it and make sure everything is working properly.
How to clean the outside
To clean the outer part of your helmet so that it looks like new again you will need to fill up your kitchen sink with soapy water, several micro fibre cloth, a soft toothbrush.
If there are lots of insects on the visor and the helmet’s outer layer dip paper kitchen towel into warm water and lay it on the helmet. Let it soak for a few minutes, then remove it. This can help to get the road dirt and dead bugs off the helmet without the need to scrub and avoid any damage or scratch to the paint or visor.
Remove the external parts such as visor and use a moist, lathered micro fiber cloth to wipe the whole helmet. Wipe gently, don’t rub hard as it can scratch the finish. For very difficult areas like the visor’s mounting points, use a soft toothbrush to remove the dirt and stain.
After this, take another microfiber cloth, soak it in lukewarm water and wipe over the whole helmet. In just a few minutes your helmet will look much better.
Detach the visor and wash it separately. You can follow the same process but be gently while rubbing as you may scratch it. For tough stains you can soak the visor in warm lathered water for several minutes, then wipe it with cloth. For drying the helmet put back all the parts that were taken off and keep it in a airy area. To dry quickly you should never use any heat source, you can only use fan.
If the helmet has a shiny finish you may wax and polish it, however check the manufacturer’s instructions to ensure that the finish you apply is suitable for the outer layer. Wax should not be used on matt-finished helmet.
The whole cleaning process may be completed in 15 to 20 minutes and drying could take several hours. Your helmet may not look brand new but it will surely be much cleaner and free from odors.
How to clean the inside
When cleaning the inside of your helmet you will have two types of liners, removable and non-removable. It is easy to work with removable liners. Just pull it out with the cheek pads. They are kept in position with pop studs and a quick pull can bring them out.
You can wash it by hand in your kitchen sink adding a gentle cleaner. You may use Johnson’s Baby Shampoo. . The residue remaining after rinsing will not harm your skin or degrade the material or Velcro. This is important if you wash regularly. After washing rinse well and hang out to dry.
Another option which is easier, is to place the liners in your washing machine. Put them in a net washing bag and use delicate cycle, maximum 30 degrees and wash them with normal laundry detergent. Don’t put the liners in the dryer or apply heat as it can affect the material and make them shrink. The liners should not be placed back in the helmet until they are completely dry.
You will find EPS impact liners under the removable liners. These form the inner covering of the helmet and helps to absorb energy during impact. You cannot remove these, just use a damp cloth to gently wipe it clean.
If the linings are non-removable you have to clean in a different way. Detach all parts like the visor and parts which can be easily removed.
Fill a bucket with warm water and gentle cleaner. Again, you may use Johnson’s Baby Shampoo. Stir up the water until it becomes foamy. Carry the helmet and bucket to your shower. To get the outer dirt off rinse the helmet under warm water in the shower, then put it into the bucket. Leave it for several minutes so it gets soaked, then turn it upside down.
Rub the lathered water into the liner. While doing this be gentle yet firm. In a few minutes you will see lot of dirt coming out of the liner. After the liner is cleaned, rinse it in warm water under the shower and make sure all the soap is washed away.
Place the helmet in a well ventilated area and dry it naturally. Never use a hairdryer to quicken the process as it can damage your helmet. However, you can use a fan to dry it fast.
Tips To Find The Right Motorcycle Helmet
The DOT Approved is important
The DOT standard- When purchasing a helmet you should check if it meets the standards set by the Department of Transportation. Look for the DOT symbol on the helmet. Inside the helmet you’ll find a label with important information about the helmet like the manufacturer’s name, the model number, year, size, the material used to make it and some info about the company. The logo and label must be there.
Helmets need to be made from a strong polystyrene or Styrofoam layer that can protect the head during a collision. The thickness should be one inch and the weight around three pounds. The make should be simple with no embellishments like spikes that can injure your head. To hold the helmet in place it is also important to have chin straps with firm rivets.
Shield or Without Shield
Helmets that cover your entire face can be advantageous . The face shields protect you from dust, wind, rain, insects, debris that can hit your face. If you like to have helmets without shields, you can purchase a separate goggles to protect the eyes. Remember that windshields can’t offer sufficient protection.
While riding a motorcycle it is reasonable to wear to helmet. It lessens the wind resistance that can make you exhausted especially on long journeys. Large insects that might hit on your face, or cigarette butts thrown from moving cars are just some of the things you can avoid wearing a helmet.
3. Size and Price
You will find motorbike helmets of all sizes and prices. Just because a helmet is costly doesn’t mean it will offer good protection. Customization and wonderful designs are often the reasons for high pricing. Some of the attractive helmets don’t have the necessary safety certification which assures a certain degree of protection during accidents. The best motorcycle helmet must be subject to various lab tests. It must be able to withstand the type of impact that occurs in typical accidents and the strap has to be strong enough to hold the helmet in place during impact. Testing. If you have to choose between several similar priced helmets it is worth to go for the ones with this sticker as that you could possibly save your life in an accident. They have expanded polystyrene inner lining that look somewhat like plastic. A helmet should be replaced if it gets hit by a hard object as it may have absorbed a lot of energy already and can’t offer protection during an accident. Riders often select helmets that match their personality. However helmets with intricate designs are often pricey.
Nowadays there are many good and cheap motorcycle helmets available in the market. Any helmet certified by the Department of transport has to meet a set of minimum safety standards. It has to offer enough protection from serious injury. Apart from protection, helmets offer many benefits to enhance the riding experience.
Talking with the local cops can easily convince a rider to wear a helmet. They have lot of experience responding to emergency calls involving motorcyclists. Often they will tell that it was not the fault of the motorcyclist but as he wasn’t wearing a helmet he got seriously injured. And no amount of insurance compensation can make up for lost lives.
Show Your Personality
Just because a helmet is a safety gear doesn’t mean it cannot be stylish. It can be used to show your personality. There are helmets with wonderful illustrations on the outer shell. Illustrations can be custom made too.
It can be fun to ride a motorcycle on the open road. Though helmets were not given much importance earlier nowadays they are considered lifesavers. Whether a helmet is costly or cheap, make sure that it meets the safety standards so that you can enjoy your ride, worry-free.
Helmets protect your head from crash and concussion. There are many types of helmets available in the market but it is recommended to choose DOT motorcycle helmets that are among the best when considering safety.